Gå til hovedindhold Spring til søgning Gå til hovednavigation

DB-12SSR/D 12-ch AC Solid-State Relay Daughter Board, OPTO-22 Compatible

Produktinformation "DB-12SSR/D 12-ch AC Solid-State Relay Daughter Board, OPTO-22 Compatible"

The DB-12SSR/D is a 12-channel AC solid-state relay daughter board for switching mains-level loads from a DAQ system. Each channel is a Form A SSR, and the board plugs directly into an OPTO-22 compatible board, so it can be added to an existing acquisition setup without custom wiring.

Field wiring terminates on screw terminals, and an LED on each channel shows the relay state, which helps with commissioning and fault finding. Per the ordering information, this variant ships with a CA-3710 DB37 male-to-male cable (45º, 1 m) instead of the CA-5015 flat cable supplied with the base DB-12SSR.

Typical uses include on/off switching, energy management, test automation and process control. The board operates from 0 to 60 °C and is stored between -20 and 70 °C, with humidity rated at 5 % to 90 % non-condensing.

Applications

  • On/off control
  • Energy management
  • Test automation
  • Process control
Product type: Daughter board
Interface: 20-pin, 37-pin D-sub, OPTO-22 compatible
Relay outputs: 12 (SSR, Form A)
Isolation: Optical
Operating temperature: 0 ~ 60 °C

Specifikationer

Relay Output
Channels12 X FORM A
TypeSSR
Contact Rating4 A @ 240VAC
Operate Time1/2 cycle of voltage sina wave 1ms (max)
Electrical EnduranceLong Life, No Arcing, No Bounce, No Switching Noise
Power
Consumption400 mA @ 5 V
Mechanical
Dimensions (mm)223.5 mm x 135.5 mm
Environment
Operating Temperature0 ~ 60°C
Storage Temperature-20 ~ 70°C
Humidity5% to 90 % noncondensing

Specifikationer som oplyst af producenten. Ret til ændringer forbeholdes.

0 af 0 bedømmelser

Gennemsnitlig bedømmelse på 0 ud af 5 stjerner

Skriv en anmeldelse!

Del dine oplevelser med andre kunder.