A-821PGL/S ISA Multifunction DAQ Board, 16-ch 12-bit AI, 45 kS/s
ISA bus multifunction DAQ board with 16 single-ended or 8 differential 12-bit analogue inputs sampling at up to 45 kS/s, plus analogue output and 16 digital inputs and 16 digital outputs.
- 12-bit A/D converter with 16 single-ended or 8 differential input channels
- Maximum sampling rate of 45 kS/s
- Software programmable gain of 1, 2, 4 and 8 (A-821PGL low gain version)
- Analogue output with 0 ~ 5 V and 0 ~ 10 V ranges
- 16 digital inputs and 16 digital outputs, 5 V/TTL levels
- Software, pacer, external and event A/D trigger modes
1.958,24 kr. pr. stk.
| 1–9 stk. | 1.958,24 kr. | |
|---|---|---|
| 10–30 stk. | 1.905,92 kr. | −3 % |
| 31+ stk. | 1.861,08 kr. | −5 % |
Produktinformation "A-821PGL/S ISA Multifunction DAQ Board, 16-ch 12-bit AI, 45 kS/s"
The A-821PGL/S CR is a 12-bit multifunction data acquisition board for PC/AT compatible computers with an ISA bus. It combines 16 single-ended or 8 differential analogue inputs, an analogue output with 0 ~ 5 V and 0 ~ 10 V ranges, and 16 digital inputs and 16 digital outputs on a single card, which suits engineers who need mixed analogue and digital I/O in one PC slot.
The A-821PGL version provides software programmable gains of 1, 2, 4 and 8 on the analogue inputs, with a maximum sampling rate of 45 kS/s. Several trigger modes (software, pacer, external and event) and data transfer modes (polling, interrupt and DMA) allow the acquisition to be matched to the timing needs of the application.
The listing for this ordering code includes a DB-8225 terminal board and a CA-3710 D-Sub cable, giving a ready-to-wire option for connecting field signals to the board.
Applications
- Signal analysis
- Industrial automation
- Laboratory automation
- Sensor interface
- FFT & frequency analysis
- Transient analysis
- Production test
- Process control
| Product type: | DAQ board |
|---|---|
| Interface: | ISA Bus |
| Digital inputs: | 16 |
| Digital outputs: | 16 |
| Analog inputs: | 16 |
| Operating temperature: | 0 ~ +60 °C |
Specifikationer
| Hardware | |
|---|---|
| Connector | Female DB37 x 1 20-pin box header x 2 |
| Analog Input | |
| Channels | 16 single-ended/8 differential |
| Range | ± 5V, ±2.5V, ±1.25V, ± 0.625V |
| Resolution | 12-bit |
| Accuracy | 0.1% of FSR ±1 LSB @ 25 °C, ±10 V |
| Sampling Rate | 45 kS/s. Max. |
| Overvoltage Protection | Continuous ±35 Vp-p |
| Zero Drift | 15 ppm/°C of FSR |
| Trigger Mode | Software, Pacer |
| Data Transfer | Polling, Interrupt |
| Analog Output | |
| Channels | 2 |
| Range | 0 ~ 10 V, 0 ~ 5 V |
| Resolution | 12-bit |
| Accuracy | ±6 LSB |
| Response Time | 500 kHz (Typical) |
| Voltage Output Capability | ±5 mA |
| Slew Rate | 0.6 μs to 0.01% for full scale step |
| Operation Mode | Static Update |
| Digital Input | |
| Channels | 16 |
| Type | 5 V/TTL |
| ON Voltage Level | 2.0 V Min. |
| OFF Voltage Level | 0.8 V Max. |
| Response Speed | 1.0 MHz (Typical) |
| Trigger Mode | Static Update |
| Digital Output | |
| Channels | 16 |
| Type | 5 V/TTL |
| Operation Mode | Static Update |
| Load Voltage | Logic 0: 0.4 V Max. Logic 1: 2.4 V Min. |
| Load Current | Sink: 40 mA Source: 20 mA |
| Response Speed | 1.0 MHz (Typical) |
| DO Readback | Yes |
| Timer/Counter/Frequency | |
| Channels | 1 |
| Type | 5 V/TTL |
| Resolution | 16-bit |
| PC Bus | |
| Type | ISA |
| Data Bus | 8-bit |
| Power | |
| Consumption | 300 mA @ +5 V 60 mA @ +12 V 30 mA @ -12 V |
| Mechanical | |
| Dimensions (mm) | 106 X 160 X 22 (W x L x D) |
| Environment | |
| Operating Temperature | 0 ~ +60°C |
| Storage Temperature | -20 ~ +70°C |
| Humidity | 5 ~ 85% RH, Non-condensing |
Specifikationer som oplyst af producenten. Ret til ændringer forbeholdes.
Downloads
Login