Wall Mount Kit

IP67 RJ45 Plug.

Cap with Tether.

IP67 Power Plug (5-pin).

IP67 Power Plug (3-pin).

ASO-0015 is an optional wall mount kit for metal-case modules with a 28 mm case width. It lets you fix the module to a wall or panel without a DIN-rail, which suits installations where rail space is limited or the mounting surface is flat.The kit contains two wall mount brackets and six screws, so everything needed for the fixing is supplied in one package. Dimensions for the bracket are given by the manufacturer in millimetres.The kit is RoHS and WEEE certified. Check the case width of your module before ordering, as this accessory is designed only for the 28 mm size.ApplicationsWall mounting of 28 mm wide metal-case modules in control cabinets and panelsInstallations where DIN-rail mounting is not practical

The ASO-0023 is an optional wall mount kit for modules with a 44 mm wide metal case. It lets you fix a compatible module to a wall or panel without a DIN-rail, which suits installations where rail mounting is not practical.The kit contains two wall mounts and six screws, so everything needed for the fixing is included. It is an accessory and must be ordered separately from the module it is intended for.The product is listed as RoHS and WEEE compliant. Check the case width of your module against the 44 mm specification before ordering.ApplicationsWall or panel mounting of 44 mm wide metal-case modules

The ASO-0057 is a wall mount kit for mounting metal case USB-4018HS Series modules on a wall. It is designed to hold two metal case modules with a case length of 153 mm, so two units can be fixed together as a single installation.The kit includes two wall mounts and eight screws. It is listed as RoHS and WEEE compliant, and is intended for engineers who need a simple mechanical fixing for USB-4018HS data acquisition hardware in a cabinet or equipment wall.Choose the ASO-0057 when you need an accessory matched to the 153 mm metal case size rather than a generic bracket. Check the case length of your modules before ordering, as the kit is specified for this case size only.ApplicationsWall mounting of two USB-4018HS metal case modules

ASO-0058 is a wall mount kit for installing a 100 mm wide metal case module on a wall. It is an optional accessory, so it suits installations where a surface mount is preferred to a standard mounting method.The kit contains two wall mounts and four screws, so everything needed for the fixing is included in the box. Dimensions are given in millimetres in the manufacturer's drawing, which should be checked against the module before fitting.Designed for 100 mm case width metal modulesIncludes two wall mounts and four screwsRoHS and WEEE compliantApplicationsWall mounting of 100 mm wide metal case modules in control cabinets, panels or equipment racks

ASO-0059 is an optional wall mount kit for the USB-4018HS Series. It is designed for modules in a metal case with a width of 153 mm, giving a simple way to fix the unit to a wall rather than mounting it on a panel or rail.The kit is supplied with everything needed for the fixing:One wall mount bracketFour screwsThe ASO-0059 is RoHS and WEEE certified. Check the case width of your module against the 153 mm specification before ordering.ApplicationsWall mounting of a 153 mm wide metal-case USB-4018HS module