Mini-PAC

4GB microSD card.

The G-4510 CR is a power-saving programmable automation controller designed for unattended remote sites where mains power is unavailable. Its built-in solar charger manages a 12 V lead-acid battery, so the unit can run from solar power in the field.The G-4510 CR combines 8 analogue inputs (0 ~ 20 mA, 12-bit) with 3 digital inputs, 3 open-collector digital outputs and 1 Form C relay output. An Ethernet port and RS-232 and RS-485 COM ports allow it to connect to local equipment and to a host system. Optional 4G and NB modules support wireless data transmission, and an optional GPS module adds 32-channel tracking.Typical deployments include hydrologic and wind monitoring, mudslide monitoring, and vehicle or maritime tracking. The unit is DIN-rail or wall mountable in a metal casing rated for -20 ~ +70 °C operation.ApplicationsHydrologic and wind monitoringMudslide monitoring systemsVehicle monitoring and trackingMaritime GPS tracking systems

The G-4510D CR is a Mini-PAC for remote, battery-powered machine-to-machine sites where mains power is unavailable or impractical. Its built-in solar charger manages a 12 V lead-acid battery, and low-voltage disconnect and reconnect thresholds protect the battery from deep discharge. The ordering code adds the LCD display to the base G-4510 specification.The unit combines 8 current analogue inputs, 3 dry-contact digital inputs, 3 open-collector digital outputs and a Form C relay output with an RJ-45 Ethernet port and both RS-232 and RS-485 serial ports. Optional 4G (EC21-AU or EC25-E) or NB (BG96) modules provide wireless data transmission, and an optional GPS module with 32-channel All-In-View tracking supports vehicle or maritime position tracking.The embedded MiniOS7 operating system includes anti-virus protection, and TCP and UDP client connections are supported over 4G LTE. The device is built into a metal casing, is rated for -20 ~ +70 °C operation and mounts on DIN-rail or wall.ApplicationsHydrologic and wind monitoringMudslide monitoringVehicle monitoring and trackingMaritime GPS tracking

G-4514-4GAU is a power-saving programmable automation controller for remote, unattended sites where mains power and fixed networking are unavailable. It combines a cellular transceiver with a solar charger for 12V lead-acid batteries, so it can run as a self-contained data logging and control node.The controller runs an embedded MiniOS7 with anti-virus protection and supports GSM, WCDMA and 4G LTE connectivity, with TCP and UDP client connections over 4G LTE. On the wired side it provides a 10/100Base-T(X) Ethernet port, RS-232 and RS-485 COM ports and SD card support. Its I/O set comprises 8 current-type analog inputs (0 ~ 20 mA), 3 dry-contact digital inputs, 3 open-collector digital outputs and one Form C relay output.Built-in real-time clock, NVRAM and EEPROM for timestamped data and retained settingsMetal DIN-rail or wall-mount housing rated for -20 ~ +70 °C operationRegional variant for Asia only, except ChinaApplicationsHydrologic monitoringMudslide monitoringWind monitoringVehicle monitoring and tracking

G-4514-4GC CR is a power saving PAC with a built-in 4G cellular transceiver and a solar charger for lead-acid batteries, designed for unattended M2M monitoring in remote locations where mains power is not available.The unit combines an 80 MHz processor, embedded MiniOS7 with anti-virus support, and I/O covering 8 analog inputs (0 ~ 20 mA), 3 digital inputs, 3 digital outputs and a Form C relay. Connectivity includes GSM, WCDMA and 4G LTE, a 10/100Base-T(X) Ethernet port, RS-232 and RS-485 serial ports, and SD card support. TCP and UDP client connections are supported over 4G LTE.The listed variant is marketed for Asia only. Optional 128 x 64 dot LCM display and 32-channel GPS with All-In-View tracking are available on the wider G-4514 series and can suit vehicle or maritime tracking as well as hydrological monitoring.ApplicationsHydrologic and wind monitoringMudslide monitoring systemsVehicle monitoring and trackingMaritime tracking (with optional GPS)

G-4514D-4GAU CR is a cellular programmable automation controller for remote sites where mains power and fixed wiring are not practical. It combines a GSM/WCDMA/4G LTE transceiver with a solar charger for lead-acid batteries, so it can run unattended on a small solar installation. The D variant adds a 128 x 64 dot LCM display for local status viewing.The controller provides 8 current analogue inputs (0 ~ 20 mA), 3 digital inputs, 3 open-collector digital outputs and 1 Form C relay output. Serial communication is available through RS-232 (COM1) and RS-485 (COM2), while a 10/100Base-T(X) RJ-45 port connects the unit to a local network. The embedded MiniOS7 runtime and TCP/UDP client support over 4G LTE make it suitable for logging and forwarding field data from distributed sites.Built for harsh environments, the metal housing mounts on a DIN rail or wall. The listed operating range is -15 ~ +55 °C. This ordering code is intended for sale in Asia, excluding China.ApplicationsHydrologic and wind monitoringMudslide monitoringVehicle monitoring and tracking

The G-4514D-4GC CR is a power saving programmable automation controller with an integrated cellular transceiver, built for remote M2M monitoring where mains power is limited. Its solar charger for 12V lead-acid batteries lets it run from a small solar installation, and the LCD display provides on-site status. This variant uses the frequency band for China and is intended for Asia only.The controller combines 8 analogue inputs (0 ~ 20 mA, 12-bit), 3 digital inputs, 3 open-collector digital outputs and a Form C relay output, so it can read field sensors and switch local equipment. Communication options include a 10/100Base-T(X) Ethernet port, RS-232 and RS-485 serial ports, and TCP/UDP client connections over 4G LTE. The unit runs an embedded MiniOS7 with anti-virus protection and supports SD card storage.Typical deployments include hydrologic and wind monitoring, as well as vehicle monitoring and tracking systems. The metal housing is DIN-rail or wall mountable, with an operating temperature range of -15 ~ +55 °C.ApplicationsHydrologic monitoringWind monitoringCar monitoring and tracking systems

4G Power Saving PAC with Solar charger and GPS. (Asia Only, Except China).

The G-4514P-4GC CR is a power-saving PAC for remote field sites that depend on battery and solar power. It combines a cellular transceiver with a solar charger for a 12 V lead-acid battery, so it can run unattended on a monitoring or tracking installation.Eight 0 to 20 mA analogue inputs, three digital inputs, three open-collector digital outputs and a Form C relay output cover common sensor and actuator wiring. Ethernet, RS-232 and RS-485 ports let it connect local devices to the cellular network, with TCP and UDP client connections over 4G LTE. The GPS option, with 32-channel All-In-View tracking, adds position data for vehicle or maritime use.A built-in real-time clock, NVRAM, EEPROM and watchdog timer support timekeeping and reliable operation, and SD card support adds storage. The metal housing mounts on DIN-rail or wall and is rated for -20 to +70 °C operation.ApplicationsHydrologic and wind monitoringMudslide monitoringVehicle monitoring and trackingMaritime tracking systems

4G Power Saving PAC with Solar charger, LCD display and GPS. (Asia Only).

The G-4514PD-4GC CR is a power-saving programmable automation controller with a built-in cellular transceiver and solar charger. It suits unattended sites that rely on battery power and need to report sensor data over a 4G LTE connection, such as hydrologic or wind monitoring stations.This ordering code is specified with an LCD display and a 32-channel GPS receiver, and is tuned for the Chinese frequency bands (Asia only). The GPS option allows the unit to act as a tracking node for vehicle or maritime applications, while the display gives on-site status information.Embedded MiniOS7 with anti-virus protectionCellular connectivity across GSM, WCDMA and 4G LTE with TCP and UDP client connectionsLead-acid battery charging with low-voltage disconnect at 11.1 V and reconnect at 12.6 V8 analogue current inputs (0 ~ 20 mA), 3 digital inputs, 3 digital outputs and 1 relay outputApplicationsHydrologic monitoringWind monitoringMudslide monitoring systemsVehicle monitoring and trackingMaritime tracking systems

4G Remote Terminal Unit with GPS. (Asia Only).

NB-IoT Remote Terminal Unit with GPS. (Asia Only).