PISO-725U Universal PCI Card, 8-ch Relay Output and 8-ch Isolated DI
PCI card with 8 Form C electromechanical relay outputs and 8 optically isolated digital inputs, supporting 3.3 V/5 V PCI slots and state-change interrupts on all inputs.
- Universal PCI interface supporting 3.3 V and 5 V PCI bus signalling
- 8 electromechanical Form C relay outputs with status readback and onboard LED indicators
- 8 optically isolated digital inputs with 3750 Vrms photo-isolation
- Jumper-selectable isolated or non-isolated digital inputs
- State-change interrupt on all digital inputs, removing the need for continuous polling
- Card ID switch to identify individual boards when using two or more cards in one computer
1.397,68 kr. pr. stk.
| 1–9 stk. | 1.397,68 kr. | |
|---|---|---|
| 10–30 stk. | 1.360,30 kr. | −3 % |
| 31+ stk. | 1.330,41 kr. | −5 % |
Produktinformation "PISO-725U Universal PCI Card, 8-ch Relay Output and 8-ch Isolated DI"
The PISO-725U is a universal PCI digital I/O board for PCs that need both switched control outputs and isolated contact sensing. It fits 3.3 V and 5 V PCI slots and combines eight electromechanical relay channels with eight optically isolated digital inputs on a single card.
The relay channels suit circuits that must be driven from a low-power control signal with full electrical separation, or where one signal has to switch several circuits. Relay status can be read back in software, and onboard LEDs show each channel's state. All relays are de-energised at power-on.
The digital inputs have 3750 Vrms photo-isolation and can be set by a hardware jumper to isolated or non-isolated operation. Every input generates an interrupt on a state change, so contact closures and openings can be detected without continuous polling. A Card ID switch lets software identify each board when two or more cards are installed in one computer. The card is supplied with one CA-4002 D-Sub connector.
Applications
- Factory automation
- Product test
- Laboratory automation
- Contact closure monitoring
- External voltage sensing
- Load sensing
- I/O control
| Product type: | PCI digital I/O board |
|---|---|
| Interface: | PCI |
| Digital inputs: | 8 |
| Relay outputs: | 8 |
| Ports: | 1 |
| Isolation: | 3750 Vrms |
| Power input: | 300 mA @ +5 V |
| Operating temperature: | 0 ~ +60 °C |
| Mounting: | PCI slot |
Specifikationer
| Hardware | |
|---|---|
| Connector | Female DB37 x 1 |
| Digital Input | |
| Channels | 8 (Photocoupler) |
| Sink/Source (NPN/PNP) | Sink |
| ON Voltage Level | 9 ~ 24 V |
| OFF Voltage Level | 0 ~ 1 V |
| Response Speed | 4 kHz (Typical) |
| Trigger Mode | Static Update |
| Isolation | 3750 Vrms (Using external power) |
| Relay Output | |
| Channels | 8 |
| Type | Form C |
| Contact Rating | AC: 0.3 A/120 V DC: 1 A/30 V |
| Operate Time | 5 ms (Typical) |
| Release Time | 10 ms (Typical) |
| PC Bus | |
| Type | 3.3 V/5 V Universal PCI, 32-bit, 33 MHz |
| Data Bus | 8-bit |
| Power | |
| Consumption | 300 mA @ +5 V |
| Mechanical | |
| Dimensions (mm) | 110 x 150 x 22 (W x L x D) |
| Environment | |
| Operating Temperature | 0 ~ +60°C |
| Storage Temperature | -20 ~ +70°C |
| Humidity | 5 ~ 85% RH, Non-condensing |
Specifikationer som oplyst af producenten. Ret til ændringer forbeholdes.
Downloads
Login