ALM-Horn-BR Piezo Alarm Siren with Blue/Red LED, 1 DI, 1 DO, 12-48 VDC
Stand-alone piezo alarm siren with 8 blue and 8 red ultra-bright LEDs, one dry-contact input and one open-collector output, powered from 12 ~ 48 VDC. IP43 rated for panel or wall mounting.
- Piezo transducer siren with 120 ±5 dB at 10 cm / 3.0 kHz (without waterproof membrane)
- 8 blue and 8 red ultra-bright LEDs under a water-clear upper cover
- Four selectable alarm tones set by DIP switch SW1 and SW2
- 1 digital input, photo-coupled, sink-type dry contact, with NC/NO mode selected by SW4
- 1 open-collector (sink) digital output, 3.5 ~ 30 VDC load voltage, 400 mA load current
- Power input 12 ~ 48 VDC with reverse protection, 0.4 W active consumption
635,31 kr. pr. stk.
| 1–9 stk. | 635,31 kr. | |
|---|---|---|
| 10–30 stk. | 620,36 kr. | −2 % |
| 31+ stk. | 605,41 kr. | −5 % |
Produktinformation "ALM-Horn-BR Piezo Alarm Siren with Blue/Red LED, 1 DI, 1 DO, 12-48 VDC"
The ALM-Horn-BR CR is a piezo alarm siren that gives an audible and visual alert from a single dry-contact signal. Its water-clear upper cover houses 8 blue and 8 red ultra-bright LEDs, with blue indicating system status and red indicating alarm status. Four selectable alarm tones are set by DIP switch, so one unit can be matched to the sound expected on site.
The unit accepts a dry-contact input from alarm sources such as security, building automation or fire alarm devices, with NC or NO input mode selected by switch. A single open-collector output is available for passing the signal on. The siren is rated at 120 ±5 dB at 10 cm / 3.0 kHz without the waterproof membrane, and carries IP43 protection.
Choose this model when you need a self-contained alarm siren rather than a networked device. The -WF and -MRTU variants add WLAN and RS-485 Modbus connectivity respectively. The ALM-Horn-BR CR is supplied for panel or wall mounting and operates from -20 ~ +75 °C.
Applications
- Audible and visual alarm signalling from dry-contact security alarm outputs (SA)
- Alarm signalling from building automation outputs (BA)
- Alarm signalling from fire alarm outputs (FA)
| Product type: | Alarm siren |
|---|---|
| Digital inputs: | 1 |
| Digital outputs: | 1 |
| Isolation: | 3750 VDC |
| Power input: | 12 ~ 48 VDC |
| Operating temperature: | -20 ~ +75 °C |
| Mounting: | Panel / Wall |
Specifikationer
| EMS Protection | |
|---|---|
| EFT (IEC 61000-4-4) | ±2 kV for Power |
| ESD (IEC 61000-4-2) | ±8 kV Air for Random Point |
| LED Indicators | |
| Status | 2 colors LED, Blue for System status, Red for Alarm status. |
| Digital Input/Counter | |
| Channels | 1 |
| Type | Dry Contact: Sink |
| ON Voltage Level | Close to GND |
| OFF Voltage Level | Open |
| Isolation | 3750 VDC |
| Digital Output | |
| Channels | 1 |
| Type | Open Collector (Sink) |
| Load Voltage | +3.5 VDC ~ +30 VDC |
| Load Current | 400 mA |
| Alarm Output | |
| LED | Water clear upper cover with 8 RED UltraBright RED LED -BR: With 8 Blue + 8 RED UltraBright LED |
| LPiezo Transducer Pressure Level | 120 ±5 dB @10cm/3.0 KHz (W/O waterproof membrane) |
| DIP Switch | |
| Mode | SW1,2: Include 4 kinds of alarm Tone, SW4:Input Mode (NO/NC) select |
| Power | |
| Input Range | 12 ~ 48 VDC with Reverse Protection (Vin to GND) |
| Consumption | 0.4 W Active. |
| Mechanical | |
| Dimensions (mm) | 119 x 119 x 48 (W x L x H) |
| Installation | Panel Mount/ Wall Mount |
| Ingress Protection Rating | IP43 |
| Environment | |
| Operating Temperature | -20 ~ +75°C |
Specifikationer som oplyst af producenten. Ret til ændringer forbeholdes.
Downloads
Login