ECAT-M801-8AX PCI Express EtherCAT MainDevice Board, 8-Axis, 13-ch DIO
PCI Express EtherCAT MainDevice board for up to 8-axis motion control, with 13 digital inputs, 13 digital outputs and two encoder interfaces. Supplied without cable and daughter board.
- Up to 8-axis motion control with EtherCAT cycle time up to 0.5 ms
- Synchronised motion (E-GEAR, E-CAM), virtual axes and multi-axis linear interpolation
- On board 13 DI and 13 DO for machine I/O
- Two encoder interfaces (Quadrature, CW/CCW, Pulse/Dir.), 32-bit, 1 MHz, with 2-ch compare trigger output
- Supports up to 512 EtherCAT slaves via one RJ-45 port
- Second CPU for EtherCAT communication retention
Denne vare prissættes pr. ordre. Send os det ønskede antal, så svarer vi med pris og leveringstid.
Bed om tilbud
Ikke længere tilgængelig
Produktinformation "ECAT-M801-8AX PCI Express EtherCAT MainDevice Board, 8-Axis, 13-ch DIO"
The ECAT-M801-8AX CR is a PCI Express EtherCAT MainDevice board for PC-based motion and I/O control. Its built-in CPU handles multi-axis motion and I/O functions, which reduces the processing load on the host PC. It supports up to 8 axes, up to 512 slaves and EtherCAT cycle times down to 0.5 ms.
Motion features include synchronised motion (E-GEAR and E-CAM), virtual axes and multi-axis linear interpolation. On board are 13 digital inputs, 13 digital outputs and two 32-bit encoder interfaces with compare trigger outputs. A second CPU supports EtherCAT communication retention, which the source states keeps EtherCAT communication and process recipes running even if the OS or a program crashes.
This ordering code is supplied without cable and daughter board. The /S variants, such as ECAT-M801-8AX/S CR, include a DN-26, a CA-1515M and a CA-2615M.
- Up to 8-axis motion control on a PCI Express x1 board
- EtherCAT cycle time up to 0.5 ms and up to 512 slaves
- Synchronised motion with E-GEAR, E-CAM, virtual axes and linear interpolation
- 13 DI (sink/source) and 13 DO (open collector, sink)
- Two encoder interfaces, 32-bit, up to 1 MHz, with compare trigger output
- Second CPU for EtherCAT communication retention
Applications
- Motion control
- I/O control
- Data acquisition system
| Product type: | EtherCAT MainDevice board |
|---|---|
| Interface: | PCI Express x1 |
| Protocol: | EtherCAT |
| Digital inputs: | 13 |
| Digital outputs: | 13 |
| Ports: | 1 x RJ-45 |
| Isolation: | 3000 VDC (DI), 3000 Vrms (DO) |
| Operating temperature: | 0 ~ +60 °C |
Specifikationer
| Hardware | |
|---|---|
| Connector | RJ45 x1 DB-26 (Female) DB-15 (Female) |
| Encoder Input | |
| No. of Axes | 2 |
| Type | Quadrant, CW/CCW, Pulse/Dir. |
| Resolution | 32-bit |
| Response Speed | 1 MHz |
| Compare Trigger Output | 2-ch |
| Digital Input | |
| Channels | 13 |
| Type | Wet Contact |
| Sink/Source (NPN/PNP) | Sink/Source |
| ON Voltage Level | +19 V ~ + 24 V |
| OFF Voltage Level | +11 V Max. |
| Isolation | 3000 VDC |
| Digital Output | |
| Channels | 13 |
| Type | Open Collector |
| Sink/Source (NPN/PNP) | Sink |
| Load Voltage | +24 V |
| Load Current | 100 mA/ch |
| Isolation | 3000 Vrms |
| PC Bus | |
| Type | PCI Express x1 |
| EtherCAT | |
| Ports | 1 x RJ-45 |
| No. of Axes | ECAT-M801-8AX Max. 8 ECAT-M801-16AX Max. 16 ECAT-M801-32AX Max. 32 ECAT-M801-8AX/S Max. 8 ECAT-M801-16AX/S Max. 16 ECAT-M801-32AX/S Max. 32 |
| No. of Nodes | Max. 512 |
| Data Transfer Medium | Ethernet Cable (Min. CAT 5e), Shielded |
| Mechanical | |
| Dimensions (mm) | 135 x 192 x 21.5 (W x L x D) |
| Environment | |
| Operating Temperature | 0 ~ +60 °C |
| Storage Temperature | -20 ~ +70 °C |
| Humidity | 0 ~ 90% RH, Non-condensing |
Specifikationer som oplyst af producenten. Ret til ændringer forbeholdes.
Login